Senao EnGenius EP-801 User Manual download pdf (Page 26)

~51~

1.One is the handset to be set to receive incoming calls or make outgoing

calls (2-way intercom, broadcast and transferred call are allowed). The

option is selectable by base 1 to base 4.

2.The other option is the handset to be set to access to available bases

automatically or manually.

For 1

option (Subscribe BS)：

Press MENU, followed by “4” to enter the Call

Settings mode.

Press “6” to select Call Manager.

Press “1” to set Subscribe BS.

Re：When entering the submenu of Subscribe BS,

the LCD will show the available bases which

already subscribed.

Press

or key to select the desired base (#1~4), press

CHANGE (Left) soft key to set the Subscribe BS ON/OFF.

4. If set the Subscribe BS ON, that means the handset is able to access

the line of the desired base, so the handset is able to make outgoing call

or answer incoming call via the desired base.

On the contrary, if set the Subscribe BS OFF, then the handset can’t

access the line of the desired base, so the handset isn’t able to make

outgoing call or answer incoming call via the desired base.

For 2

option (BS Selection)：

Press MENU, followed by “4” to enter the Call

Settings mode.

Press “6” to select Call Manager.

Press “2” to set BS Selection.

Re：Default setting is “OFF”.

Press CHANGE (Left) soft key to set the BS Selection ON/OFF.

~52~

Re：If BS Selection set “ON＂, when pressing

key, the LCD will show the available bases

(Lines), i.e. 1, 2, 3, 4. Press digit “1”, you can access

to base 1 to get the line.

Note：When single base, no “Call Manager” setting in “Call Settings”.

Visual Message Waiting Indicator (VMWI)

VMWI feature supported the FSK message which received from telephone

line; It will activate a message icon of handset and flash the VOICE

MESSAGE LED of base.

Notes:

1. A subscription to telephone company voice mail service is required.

2. If the handset still indicates the icon even after you have listened all messages,

turn it off by pressing and holding “Caller ID” key on the handset.

Adjust Handset Microphone Gain

In case you will use the handset in different workplace or environment, to

perform better voice quality for the other end, you can adjust the handset

microphone gain to suit for variable place.

Press MENU (Right) soft key while the handset is in the standby

mode.

b. Press “5” (Phone Settings), followed by “1” to enter the “Mic. Gain”

menu.

c. Use

or key to scroll the “Standard”, “Medium” and

“Low” options.

If you are using the handset in quiet environment, like office or

meeting room, the level of “Standard” is recommended.

If you are using the handset in a noisy environment, like factory or

outdoor place, the level of “Medium” or “Low” is recommended.

Adjust Headset Ring

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 166 167

Comments to this Manuals

No comments

Senao EnGenius EP-801 User Manual Page 26

Comments to this Manuals

Related products and manuals for Handset Cordless Phone Senao EnGenius EP-801